Cover ADU in Los Angeles, CA | Lodgewick ADU Los Angeles
We service Cover prefab accessory dwelling units across Los Angeles, from panel resealing to full electrical upgrades, and we’re an independent provider, not a Cover-authorized dealer. What sets our work apart here is knowing how Los Angeles code, sunshine, and seismic requirements interact with Cover’s panel system, things a generic handyman misses. Call (213) 698-7116 when your unit needs attention.
Why Los Angeles Residents Choose Us for Cover Service
Russ Delmar grew up in Palms, a few blocks from the old Helms Bakery building, and he still knows most of his neighbors by name. He learned construction at Los Angeles Trade-Technical College, where the instructors drilled one lesson into him: a permit pulled correctly the first time saves three months of grief. He’s spent fifteen years focused exclusively on ADUs, and that’s the lens we bring to every Cover unit we touch. We’ve seen what happens when panel seams open up, when coastal salt eats fasteners, and when a cheap electrical fix trips the breaker the first hot week of summer. We service Cover sales & service with the same discipline Russ applies to every job: a written price before work starts, a real arrival window, and a written guarantee. Los Angeles homeowners call us because we answer the phone and we know what we’re looking at.
Common Cover ADU Problems We Solve in Los Angeles
- Panel seam separation from thermal cycling. South-facing walls in neighborhoods like the San Fernando Valley take brutal heat, and Cover’s panel joints expand and contract hard. We see seams open up after a few seasons, letting dust and moisture into the wall cavity. We remove the failed sealant, reset the panels, and apply sealant rated for Los Angeles temperature swings.
- Mild steel fasteners corroding in coastal fog zones. Playa del Rey and other westside pockets get salt-laden fog off the Pacific. Cover’s standard fasteners are fine inland but turn orange and seize near the coast, loosening panels over time. We swap in coated fasteners and re-torque everything to spec.
- Undersized electrical panels tripping when adding heat pump HVAC. A lot of Los Angeles Cover units were built with the panel that met code at the time. Add a heat pump for those 100-degree weeks and the main breaker trips. We size the upgrade based on your panel, your wiring, and LADWP service capacity before we ever touch a screwdriver.
- Foundation settling on expansive clay in hillside areas. Mount Washington and similar hillside neighborhoods sit on soil that swells and shrinks with rain. Cover units pick up door misalignment and panel stress cracks as the foundation moves. We assess the soil, the pad, and the panel condition before recommending whether to lift, shim, or re-level.
- Dried panel joint gaskets causing drafts. East-side sun, the kind that bakes Highland Park, slowly dries the EPDM gaskets in Cover’s panel joints. Our tech recently traced a persistent draft in a Highland Park Cover S series to exactly this. We replaced the gaskets with upgraded EPDM weatherstripping and realigned the corner connectors in one afternoon.
Cover Service in Los Angeles: What Local Conditions Mean for Your Equipment
Here’s something that doesn’t apply in Pasadena or Santa Monica. The 2017 Cover units built under the old LADBS pre-approved plans often lack the Title 24 solar-ready conduit that’s now mandatory. Retrofitting one means a dedicated rooftop or ground-mount PV system with an AC disconnect visible from the street. That last part is uniquely enforced by Los Angeles Department of Building and Safety. Our team knows this because we’ve pulled the permits and talked to the inspectors. If you own an older Cover unit in Los Angeles and you’re planning any electrical work, plan for that conduit upgrade too, or you’ll be doing two electrical jobs instead of one. Tell me what you need the space to do, and I’ll tell you exactly what it’s going to take – no guessing, no runaround.
Cover Models & Products We Service in Los Angeles
We service the full Cover lineup: the S Series studio and one-bedroom, the M Series one- and two-bedroom, the L Series two-bedroom with den or loft, and the Garage Conversion Kit. For structural and waterproofing work we use OEM Cover components, because mixing parts on a panel system is how you end up with a leak nobody can trace. For electrical upgrades and HVAC retrofits, we recommend UL-listed aftermarket parts where they’re cost-effective. And we’re honest about repair versus replace: a Cover unit over 15 years old with multiple panel failures is often better served by a full re-clad than by patch after patch.
Cover Service Pricing in Los Angeles

Here’s what Cover ADU work typically runs in Los Angeles:
- Panel seam reseal (single wall): $800 to $1,500
- Fastener replacement (coastal corrosion): $400 to $900
- Electrical panel upgrade (100A to 200A): $2,200 to $3,800
- Foundation re-level / shim: $1,500 to $4,000 depending on access and slope
- Full gasket replacement (all walls): $1,200 to $2,500
Every estimate includes the walkthrough, the diagnostic time, and a written line-item price before anything gets ordered. Call (213) 698-7116 for a free estimate on your Cover unit.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Cover ADU in Los Angeles
Adding a bathroom to an existing Cover unit with a Home Addition Contractor - Los Angeles requires a plumbing permit tied to your ADU’s original approval, and depending on your lot’s sewer lateral condition, LADBS may require a lateral inspection before sign-off. We handle that paperwork as part of the job. Call (213) 698-7116 and we’ll check your specific property before you spend anything on fixtures.
Yes, but it usually means adding the solar-ready conduit and possibly a panel upgrade, because 2018 units predate several Title 24 revisions. We assess what your unit is missing and price the gap, not the whole code book.
Most pre-1980 Los Angeles garage pads are four inches thick with no rebar, and Cover’s panel system needs a stable, code-compliant base. We typically saw-cut, remove, and pour a new slab with proper footings, which is faster and cheaper than trying to reinforce what’s there.
Yes. Los Angeles is in seismic design category D, and the connection between Cover panels and the foundation or steel frame must use specified high-strength fasteners with the right spacing. We never substitute hardware store bolts on a structural connection.
Most Cover units in Los Angeles have a 100A subpanel, and adding a 40A or 48A EV charger requires either a load calculation that leaves enough headroom or a subpanel upgrade. We run the calculation first, then give you a written price. Call (213) 698-7116 for an exact number, estimates are free.
Service Areas Near Los Angeles
We serve Los Angeles service area neighborhoods including Palms, West Adams, Highland Park, and Mount Washington. We also take calls from Cover service in Culver City and Cover service in Santa Monica when the work falls within our schedule. If your unit sits somewhere in between, call and ask, we’ll tell you straight.
Book Your Cover Service in Los Angeles Today
We answer the phone, we show up in the window we give you, and we put the price and the guarantee in writing before work starts. Call (213) 698-7116 to schedule your free estimate.
Written by Russ Delmar, Owner at Lodgewick ADU Los Angeles, serving Los Angeles since 2010.











